Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Antenna connect disconnect switch implementation

Manoj
Manoj Member ✭✭
Hi all,
After watching a couple of videos and concepts for the antenna disconnect arrangement, I put together this arrangement.

https://youtu.be/6BkzOGnGM7U

comments welcome.

73

Manoj VU2CPL
1 votes

Open for Comments · Last Updated

Comments

  • Dave K5OZ
    Dave K5OZ Member ✭✭

    Manor,

    Very nice large gap version! Don’t forget to disconnect the ground also. The ground offers another path for lightning to go through your rig(s).

    Dave

    k5oz

  • Manoj
    Manoj Member ✭✭
    edited November 2020
    Thanks Dave. Your solution also looks elegant too. About your comment- Ground is disconnected along with antenna. The base is made is plywood to prevent conduction.
    In my use, ground is not practical though due to higher floor shack.
    73 Manoj VU2CPL
  • Manoj
    Manoj Member ✭✭
    Hello all, I have tested a new simpler version with a linear actuator and a ready to use sonoff device for the antenna disconnect device.
    https://youtu.be/vq5DuG9_yD8

    Comments welcome!

    73
    Manoj VU2CPL

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.