Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Dummy load or Not ?

Kick
Kick Member ✭✭
in FLEX-6000 Signature Series
Good morning all ,
I am a new user of a Flex6400 in 'remote' with a maestro.
I only have an antenna connected to the radio.
Is it safe to place a dummy load on the ANT2 socket if, in transmit mode, you do something wrong on the Maestro 's touch screen?
best regard's Patrick

Comments

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Hi Patrick, yes that is fine. When I first got my Flex 6400, I hung a 300W dummy load on Ant 2. Lately, I have been moving the rig from home to my 5th wheel camper and back on a frequent basis, so I have stopped connecting the dummy load. Now that my home and portable operations have settled into a good routine, I have much less need for the load. If I am doing some experimenting, I just reconnect. In any event, there is no harm in it and possible advantage that you will not transmit into an open port.

    73,

    Len, KD0RC

  • Dan Trainor
    Dan Trainor Member ✭✭✭

    Yes, a good idea in the case where you accidently transmit on Ant2 by mistake. I currently have a dummy load connected to mine for this purpose. dan WA1QZX

  • Kick
    Kick Member ✭✭
    thanks for your comments, that made good sense, but it's heartwarming to have some advice ... I'm running to order a dummy load from DXenginering ..

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories