Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
SmartSDR v3.2.31 and the SmartSDR v3.2.31 Release Notes. | SmartSDR v2.6.2 and the SmartSDR v2.6.2 Release Notes.
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes. | Power Genius XL Firmware v3.5.23. | Power Genius XL Utility v2.2.10.
Multiple Flex transceivers on the same WAN IP in a Multi-2 100% Remote environment
I have a need to understand how to accomplish operating multiple Flex transceivers (In this case, two 6400'ds) at a single remote transmit facility with both radios being controlled remotely by two different operators at two different remote control points external to the radio LAN.
The two operators would be accessing either one of the transceivers remotely from two different IP addresses external to the network that the radios are on. The radios, however, would be on the same LAN and would therefore have the same external WAN internet IP address.
Both transceivers would be active at the same time, on different bands. Yes, there will be remote management of antennas, bandpass filters and rotors, in this case, via GHE devices.
How does this work using SmartLink for access? Is it even possible? I am unsure how SmartLink operates as far as what information passes between a remote client and a remote radio.
Key Question: Can SmartLink handle a connection of two transceivers from different SmartLink accounts and different source IP's while the transceivers are located at the same internet IP address?
This will not be a MultiFlex environment, these are two discrete transceivers operated on different bands by different operators concurrently. At operator switch time, however, we will utilize MultiFlex on each radio so as to minimize operator switching time. We've tested and practiced this with a single radio, and it works very well.
Anyone doing this? If so, any issues?
Thanks for the answers in advance. I will crosspost this on the Facebook group as well.
Leave a Comment
- 16.2K All Categories
- 72 Community Topics
- 1.9K New Ideas
- 151 The Flea Market
- 5.5K Software
- 5K SmartSDR for Windows
- 45 SmartSDR for Maestro and M models
- 109 SmartSDR for Mac
- 150 SmartSDR for iOS
- 151 SmartSDR CAT
- 73 DAX
- 280 SmartSDR API
- 7.2K Radios and Accessories
- 5.9K FLEX-6000 Signature Series
- 573 Maestro
- 15 FlexControl
- 738 FLEX Series (Legacy) Radios
- 178 Power Genius Products
- 134 Power Genius XL Amplifier
- 15 Power Genius Utility
- 29 Tuner Genius
- 48 Shack Infrastructure
- 26 Networking
- 104 Remote Operation (SmartLink)
- 54 Contesting
- 156 Peripherals & Station Integration
- 64 Amateur Radio Interests
- 434 Third-Party Software