Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

AG 8x2 configuration

I am trying to setup AG 8x2 for 3 antenna's.

Here is my setup

Output 1 - 6m monoband

Output 3 - Steppir

Output 4 - 80/160m Vertical.


My vertical has 2 relays at the base to switch coil between 80 to 160m.

I used Array Solution box before and it was working fine. Now I setup AG 8x2 and cannot figure out how to setup OM box with 2 configuration and 1 output.

Here is my setup

No problem with output 1 and 3, i have to figure out Output 4. Here is the output 4 with 2 Bands


I need the following configuration,

For 80m, I need

But for 160m , I need


How this can be done for a single output?

Thanks

Sergey, KN7K

Best Answer

  • Sergey KN7K
    Sergey KN7K Member ✭✭
    Accepted Answer

    Well, read the (...) manual - sometimes it helps :)

    I figured it out, I had to add another line for OM module

    For 80m

    For 160m

    Pretty cool

    Sergey, KN7K

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.