Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Slice Master 6000

Enrique Rabczuk
Enrique Rabczuk Member ✭✭
edited April 2020 in SmartSDR for Windows
Slice Master 6000 work with same mode and different Band ?

Slice A  FT8 14.074
Slice B  FT8 10.136

Answers

  • Dwayne_AB6A
    Dwayne_AB6A Member ✭✭
    edited April 2020
    Yes but assumption is antenna is resonant to both bands- If not you likely have an internal or external antenna tuner which really should be set to bypass if receiving two bands sumutaniously since antenna tuners can act as filters for the bands they are not tuned to. When you go to transmit, need to make sure you are turned. You can also set up multiple icons of wsjtx on the desktop. I have a wsjtx a , b, c , d.
  • Enrique Rabczuk
    Enrique Rabczuk Member ✭✭
    edited April 2020
    Tnx Dwayne.
    The problem that appears is the WSJT windows are: Only one windows shows that Slice-A is enabled. The other window does not show the Slice-B and the "DECODE" is permanently activated and received nothing.
    I have separate antenna and towers.
  • Dwayne_AB6A
    Dwayne_AB6A Member ✭✭
    edited April 2020
    Weird! I have a 6600 and up to four slices active. Each has the WSJTX Slice x at the top of the screen. version 0.10.7c of Slice Master.
    If you are desperate, you can run multiple copies of WSJT-X and FLDIGI by copying the icon... https://www.k0pir.us/two-instances-of-wsjt-x-running-simultaneously-with-two-radios-two-antennas/ FLDIGI has a similar setup where you can specify a different config directory.




  • Dwayne_AB6A
    Dwayne_AB6A Member ✭✭
    edited April 2020
    Too funny... I had left this setup running today, 10M lit up and I had a QSO with both Fiji and Brazil on FT8 from my QTH in Redondo Beach, California. Awesome!

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories