Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Flex 6700 with micro yaesu M1
on5po
Member ✭✭
Good morning all ,
I did not find, posts about the micro yaesu M1 and flex 6700,
Here is the result of my tests,
very dubidative at first, since I tried an MD100, MD1 and others, without having a suitable result compared to a conventional transmitter like the TS850S.
First surprise, you have to go through the equalizer of the flex and that of the microphone to have a good result, separately, not good enough,
it is necessary to use the two pads, the condenser and the dynamics, separately, results not sufficient
use the flex memory setting "MD100"
use the factory setting of microphone n ° 1
now depending on the tone of your voice, small adjustments will be necessary.
I can say, that, it is a master buy, even if the price is at the level of its quality, this obviously for use with a radio flex, for conventional the price will certainly be exaggerated, and will not be a master buy, unless we want to have fun.
This comment is only mine, I wanted to share this essay.
73
ON5PO, Janny
I did not find, posts about the micro yaesu M1 and flex 6700,
Here is the result of my tests,
very dubidative at first, since I tried an MD100, MD1 and others, without having a suitable result compared to a conventional transmitter like the TS850S.
First surprise, you have to go through the equalizer of the flex and that of the microphone to have a good result, separately, not good enough,
it is necessary to use the two pads, the condenser and the dynamics, separately, results not sufficient
use the flex memory setting "MD100"
use the factory setting of microphone n ° 1
now depending on the tone of your voice, small adjustments will be necessary.
I can say, that, it is a master buy, even if the price is at the level of its quality, this obviously for use with a radio flex, for conventional the price will certainly be exaggerated, and will not be a master buy, unless we want to have fun.
This comment is only mine, I wanted to share this essay.
73
ON5PO, Janny
1
Comments
-
Jany,
You are preaching to the choir.
Many of us already found that out many years ago: That is why, we have stuck to buying the products that Flexradio makes.
Hope you enjoy it as many of us have!0 -
thank you Ernest,
It was mainly the M1 microphone that I wanted to praise and the result.
For the flex, for 7 years, I went from 5000, 6300.6500, and the most extra the 6700, I think it is useless, to say more,
73
On5po, Janny
0
Leave a Comment
Categories
- All Categories
- 377 Community Topics
- 2.1K New Ideas
- 630 The Flea Market
- 8.2K Software
- 112 SmartSDR+
- 6.4K SmartSDR for Windows
- 183 SmartSDR for Maestro and M models
- 428 SmartSDR for Mac
- 271 SmartSDR for iOS
- 258 SmartSDR CAT
- 190 DAX
- 382 SmartSDR API
- 9.3K Radios and Accessories
- 36 Aurora
- 252 FLEX-8000 Signature Series
- 7.2K FLEX-6000 Signature Series
- 944 Maestro
- 55 FlexControl
- 865 FLEX Series (Legacy) Radios
- 919 Genius Products
- 461 Power Genius XL Amplifier
- 335 Tuner Genius XL
- 123 Antenna Genius
- 296 Shack Infrastructure
- 208 Networking
- 454 Remote Operation (SmartLink)
- 144 Contesting
- 787 Peripherals & Station Integration
- 139 Amateur Radio Interests
- 1K Third-Party Software