Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Time out timer

Ken AG2K
Ken AG2K Member ✭✭
edited December 2019 in SmartSDR for Windows
Does the 6600 have a time out timer for the transmit side? I recently lost my connection remotely right after pushing the tune button and had to get someone to go into the shack to shut down the radio.

Answers

  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited September 2019
    Yes, I believe in Settings in the TX tab there is timeout setting.
  • Doug
    Doug Member ✭✭
    edited December 2019
    GO to menu in the radio and at Transmit tab you will find The Timings section has adjustments for RCA TX1, TX2 and TX3 as well as the Accessory TX, TX Delay and TX Timeout.

  • Paul - GI4FZD
    Paul - GI4FZD Member ✭✭
    edited September 2019
    A wifi switch on your 12v power supply is a good idea in case something like this happens.
  • Ken AG2K
    Ken AG2K Member ✭✭
    edited September 2019
    I had one and it also failed. I suspect some stray RF is to blame.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories