Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

have a question about flex sdr screen

Don w2xb
Don w2xb Member ✭✭
edited January 2020 in FLEX-6000 Signature Series
On my flex screen it shows the station as "desktop" How do I get my call sign on the Station title? Its the same way on cat and dx screen, not showing radio name.

Don...w2xb

Answers

  • Larry _ NY8T
    Larry _ NY8T Member ✭✭✭
    edited August 2019
    If your talking about on the bottom bar just click on it and it will turn blue to edit it.
  • Don w2xb
    Don w2xb Member ✭✭
    edited August 2019
    Hello Larry,
    Do that, but its not doesn't stay..

    Don..w2xb
  • Larry _ NY8T
    Larry _ NY8T Member ✭✭✭
    edited August 2019
    Which SmartSDR version are you running?

  • John - AI4FR
    John - AI4FR Member ✭✭
    edited August 2019
    In SSDR click on "settings" then "Radio setup" then "Radio. You'll see where to change it from there.
  • Greg N8GD
    Greg N8GD Member ✭✭
    edited August 2019
    After typing your call sign in the box at the bottom of the SSDR screen. . . . . .

         STATION: N8GD

    you MUST hit the ENTER key for it to be remembered next time you start up!

    To set the call in CAT and DAX, follow AI4FR's instructions above, but again, be sure to hit ENTER at the end of entering the call sign.
  • Don w2xb
    Don w2xb Member ✭✭
    edited August 2019
    where is ssdr located in flex?

    Don..w2xb
  • Don w2xb
    Don w2xb Member ✭✭
    edited August 2019
    Runnin 2.5.1.1
  • Jim  KJ7S
    Jim KJ7S Member ✭✭
    edited January 2020
    You can also look for 'Settings' at the top of the flex display, click on 'Radio Setup', and look for 'Nickname', in the 'Radio Identification' area. Change it then close it after you hit enter, and it should retain the 'nickname' from then on.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.