Skip to content
  • Register
    • Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
    Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

    SmartSDR v3.8.23 and the SmartSDR v3.8.23 Release Notes
    SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
    Power Genius XL Utility v3.8.9 and the Power Genius XL Release Notes v3.8.9
    Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
    Antenna Genius Utility v4.1.8
    If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
    Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

    RCA TX1 Enable not persistant

    Member ✭✭
    edited June 2020 in FLEX-6000 Signature Series

    RCA TX1 Enable is not persistant from boot up to boot up..  Anyone else have this problem?

    Radio is 6300 with latest upgrade. 

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Comments

    • Member ✭✭
      edited July 2018
      If you are looking at whether or not it is enabled before you connect to the radio it will show disabled. After you connect it will show correctly.

      Jon...kf2e
    • Member ✭✭
      edited January 2018
      No, it consistently shows not enabled after the 6300 and software are initialized and working properly.  Jim K4JAF
    • Member
      edited April 2019
      I am having the same problem with my 6700
    • Member
      edited April 2019

      OK fooling around I found that TX2 and TX3presist TX1 doesn't

      I set my amp on TX3 and no more problems

    • Member ✭✭✭
      edited April 2019

      RCA TX settings are saved in transmit profiles.


    • Member, Super Elmer Moderator
      edited June 2020
      Aare you using DDUtil?
    • Member
      edited December 2016
      True, but every time I turn on the rig, I have to go to the transmit profile and load it.
    • Member
      edited December 2016
      Yes I am using it for my Steppir
    • Member ✭✭✭
      edited December 2016
      DDutil could also be causing the RCA TX issue. Check the box for manual TX control.image
    • Member
      edited December 2016
      I will try it
    • Member
      edited December 2016
      Also my mike profile always comes up with a star next to it, indicating something has changed, but I don't know what.
    • Member ✭✭
      edited May 2019
      I found that RCA TX1 is tied to a TX profile (notice on the right side a profile listed) once you set it... i.e. Profile Heil Pro Elite AMP, then save that profile... every time you select that profile it will be set

      The second source is also DDUtil as mentioned

      Good Luck

      David
    • Member ✭✭
      edited January 2017
      I had this issue and it was the ddutil setting causing the problem. Hope you get it fixed. Joe WD5Y
    • Member ✭✭
      edited April 2017
      2 things.  Check DDUTIL as stated.  One thing I found in learning all this was to set your TX RCA ports as you want them, and save that off as a custom TX profile.  Now as long as you load that particular TX profile you should be in good shape.  This worked out great for me and solved by TX relay persistence challenges. 
    • Member ✭✭✭
      edited June 2020
      Sure would be nice to have some sort of setting's overview "dashboard" to graphically present the current state of all settings. I've had the TX1 not enabled as expected issue when SmartSDR does a dump and is restarted. Will use the notes here to troubleshoot. Still working on why every now and then SmartSDR unexpectedly terminates, but won't spend very much time on troubleshooting 1.6.21 with 1.7.x just around the corner. 73 Steve K9ZW
    • Administrator, FlexRadio Employee admin
      edited March 2017
      Every time this issue comes up in Support, it is DDUtil resetting the TX Relay port.
    • Member ✭✭
      edited May 2020
      Cannot enabled any RCA TX here picture image
    • Member ✭✭
      edited July 2019
      You are in wrong menu Go to Tx band settings Mike

    Leave a Comment

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Quick Links

    Categories