Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Dax Rx gain

Options
Member ✭✭
edited December 2019 in FLEX-6000 Signature Series
Why does my DAX Rx gain not work when i first cut the 6400 on until i click on it and move the slider? I am running v2.5.1 and did not have this problem before.

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member ✭✭✭
    edited July 2019
    Sort of the same here with 3.0.27. The levels are not correct when first starting and you must just tweak the sliders to get the levels to kick in to where they should be.
  • Member ✭✭
    edited July 2019
    same here, I have to toggle the DAX gain sliders one down one up and then the level on WSJTX drops 20dB back to normal, each time I wake up the computer from sleep mode ...
  • Member ✭✭✭
    edited July 2019
    It has been an issue for a long time, just a fact of life and I just try to remember to do this each and every time I start DAX. I know it's not a good answer but I don't see this being fixed for a long time to come.
  • Member ✭✭✭
    edited July 2019
    I wonder if this is on the bug tracker list?
  • Member ✭✭
    edited July 2019
    I'm trying to duplicate this on my radio. (6600 and latest version 3) Does the problem present when using WSJT or all times? 
  • Member ✭✭✭
    edited July 2019
    No it has nothing to do with the program being used.
  • Administrator, FlexRadio Employee admin
    edited July 2019
    We are aware of this issue (#7578) and are working on a fix.  Thanks for bringing this to our attention!
  • Member ✭✭
    edited July 2019
    Thanks for letting us know.
  • Member ✭✭
    edited July 2019
    FYI, occurs when first powering up the radio or if your change bands.  DAX RX is too high.  If you move the slider by 1 unit (aka 24 to 23) audio level then corresponds to slider position
  • Member
    edited December 2019
    Just found the issue as well.  Ugg I'm slow!  I'm running 3.1.8

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories