Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

SmartSDR v3.9.18 and the SmartSDR v3.9.18 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
Power Genius XL Utility v3.8.9 and the Power Genius XL Release Notes v3.8.9
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Do I need the fan mod?

Member
edited April 2020 in FLEX-6000 Signature Series
I have a new to me 6300, and have seen it twice shut down on its own, once while actively listening, and again just on receiving ft8 while I was doing other things. Plenty of space round it, didn't seem noisy and didn't hear any increase in fan speed, switched the meter on from frstack and pa temp was 40 ish. but the top of the case was quite warm/hot, not enough to burn but uncomfortable. Do I need a fan mod? or is it something else, and what actually is the fan mod? Are there any logs to download to see if anything was recorded?

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member ✭✭
    edited June 2019
    If its shutting down spontaneously, it may be worth opening a support ticket to check things out.  
  • Member ✭✭
    edited June 2019

    My 6600 has been running all day and night and the top of it is at room temperature.
  • Member ✭✭
    edited June 2019
    I put some additional rubber feet under mine and also make sure the intakes and outtakes aren't stuffed with dust bunnies. I have one of the early ones and it has never shut down due to thermal issues. I **** anything with a fan out, at east every 6 months.

    Pat
  • Member ✭✭
    edited April 2020
     Steve. You mentioned  you switched on the meter  from frstack ?  What is this? I have a 6300 and I'm running 2.49. Is there a way  to monitor the temp on the PA through Smart SDR? If so I would like to know how. Thank you.. 73 
  • Member ✭✭✭
    edited June 2019
    His is a 6300
  • Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited June 2019
    Please open a support case and let us diagnose it.  
  • Member ✭✭✭
    edited June 2019
    Steve, their are a few programs that work with the Flex 6000.
    I like to use this,,,   SDRMonitor (v2.3.1 - Released: 05/13/2018)

    It places a bar on the screen and you can place it anywere. It reads out all the important info.
  • Member ✭✭✭
    edited June 2019
    Does the 6300 button blink different colours for trouble codes?
  • Member ✭✭✭
    edited June 2019
    http://mkcmsoftware.com/Flex/Index

    use Release 2.4.10.19 for your version of smartsdr
    after you install it, go to the view menu and select meter window.



  • Member
    edited June 2019
    No just flashes green when its powering up and solid green when on line, I didn't notice if it was blinking after it shut down. I will keep an eye out when/if it does it again.
  • Member
    edited June 2019
    aha, no mine is definitely warm to very warm.
  • Member
    edited June 2019
    Ok will do. 

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories