Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

SmartSDR v3.9.18 and the SmartSDR v3.9.18 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
Power Genius XL Utility v3.8.9 and the Power Genius XL Release Notes v3.8.9
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Solid Orange color with On/Off Sw when turned off

Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
The On/Off switch flashes green during shut down then turns solid orange when unit shuts down.
Starts up normal with no other codes present.

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member, Super Elmer Moderator
    edited June 2020
    Sure it isn’t yellow?

    Here’s the color codes
    https://community.flexradio.com/flexr... I have seen it yellow if you inadvertantly enable the GPSDO option in software, whether or not the radio has one. Dave wo2x
  • Member ✭✭✭
    edited April 2019
    Do you have the GPSDO installed? If so, solid "Amber" after shutdown means the Radio is off, but the GPS is powered for stability.

  • Member ✭✭
    edited February 2019
    Hi Dave,

    You are correct. It was Amber and I checked the Uninstall GPS ands its now gone, back to normal, Off.
    I checked the color code errors and don't see one of Amber after the unit is turned off.
    Regards,

    Tom W3FRG
  • Member ✭✭
    edited February 2019
    Makes sense.
    But it appears the unit is powered w/o a GPS as long as the 13.8Vdc is applied, which I assume supplies the freq std to maintain stability rather than a cold start.  


    73  Tom W3FRG
  • Member ✭✭
    edited February 2019
    Its interesting that the color code error list that I referenced in the User Manual is quite different than the list in the Hardware Manual; The list you supplied.
  • Member, Super Elmer Moderator
    edited February 2019
    It is listed as Yellow in the list Tim provided. 73 Dave wo2x

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories