Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Anyone using Flex GPSDO as time server? As a waveform?

Martin AA6EMartin AA6E Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
The GPSDO option in my 6500 is a full function GPS receiver, delivering latitude, longitude, altitude, speed, and 10 MHz reference frequency.  But it also derives UTC time, presumably accurate to the microsecond.

SSDR only makes use of the freq. reference, but it will display all the other parameters once per second. Actually, the Maestro seems to synchronize itself to the GPSDO time.

It would add value to my station (and computer network) if the GPSDO could function as an NTPD network time server on the Ethernet.  (For NTPD, millisecond accuracy may be enough.) The software to do this is standard, but the most accurate time information is buried in the radio away from our reach as non-SSDR-developers.

My questions are
  • has anyone found ways to get accurate time (microseconds, ideally) through the API?  and 
  • does anyone have an idea how to create an NTPD module that would work beside SSDR?  Presumably it should come from a "time-nut" rather than from Flex developers.
I have looked at the Waveform interface a little to see if it could possibly work for NTPD.  It might be a stretch, but maybe someone can speak to that.  I don't see any recent Waveform development.  Maybe that's telling us something?

Thanks for your thoughts!

73 Martin AA6E

Answers

  • RiaRia Member ✭✭
    edited November 2019
    I would also love this but... I think they said they weren’t interested in doing that. That said you can get a cheap GPS time source.
  • John WA7UARJohn WA7UAR Member ✭✭
    edited February 2020
    If folks are interested in this option then please click the "me too" link at the top of this thread.
  • John - AI4FRJohn - AI4FR Member ✭✭
    edited July 2019
    I’d like to see this option as well. It might even help with sales of the GPSDO.
     
    An observation I have noticed: If I set my PC clock using the net, it is nearly spot on accurate when compared with WWV using a non-SDR. When I compare the PC time with GPSDO time, the GPSDO time is about .3 to .4 seconds behind the actual time. When I compare the GPSDO time with WWV while using the Flex 6700 all is well. So I guess the time it takes to receive the signal and convert it is the lag I am seeing so I have been using the net to set the clock in my PC.

  • Martin AA6EMartin AA6E Member ✭✭
    edited January 2020
    I wouldn't expect Flex to devote serious manpower to timekeeping, but community-supplied add-ons were supposed to be part of the Big Vision for the 6000 series, at least originally.
  • Bill -VA3WTBBill -VA3WTB Member ✭✭✭
    edited May 2018

     Tim - W4TME, Customer Experience Manager

    • 8935 Posts
    •  
    •  3376 Reply Likes
    Official Response





    The short answer is no.  The radio is not an NTP/SNTP server.



    The long answer is it is possible, but it isn't anything we are planning to look into anytime soon.
  • PatrickPatrick WH6HI KauaiMember ✭✭✭
    edited June 2020
    I had made the suggestion several years ago when i bought my 6500 with the GPSDO.  In the time since then, I bought a TimeMachines TM1000A and it serves as my NTP server for all my computers in my house.  It shares the GPS antenna with my 6500.  Having worked in a calibration lab many years ago makes me rather **** about time and frequency accuracy.  But I think Flex is missing the mark in not providing simple time server capabilities since everything is there to do the code. 
  • kr4kkr4k Member ✭✭
    edited December 2018
    Wish Flex would turn on the highest accuracy time tagging of the IQ samples. TO me that is much more important than an NTP server. Second would be to use this time tagging to sync samples on multiple slices.
  • Watts - K4QJZWatts - K4QJZ Member ✭✭
    edited May 2018
    It would open a few doors, one customer of mine went with RFSpace because it did not have it. But then in fairness the consumer world has other higher priorities.
  • Mark ErbaughMark Erbaugh Member
    edited February 2020
    A time server would be nice, but not critical for me. My critical need for time is for FT8 eat al, time synchronization and internet time servers with Windows clients (Dimension 4) are fine for that. What I do want to see is time stamping of the. VITA-49 data packets so we can do diversity with multiple receivers.
  • Steve - N4TTYSteve - N4TTY Member
    edited December 2018
    I bought a GPSDO several years ago, and I'm really wondering why.  I think I just wasted my money!  Now if I was able to get access to that GPS clock it would be money well spent.  Flex is using it to display accurate UTC time on the SDR software screen, how hard would it be to make that available at least through an API?

    I use Meinberg at the moment for my PC, but it sure seems like a waste when the info is just inches away!  I may look into the Time Machines TM1000A as mentioned earlier in this thread.  That looks as if it would have been a much better way than to have spent the bucks for the GPSDO.

    Flex, while you don't seem to want to do this, I think you are missing a marketing opportunity to sell more GPSDO's (as was also mentioned earlier in this thread)!
  • Andrew VK5CVAndrew VK5CV Member ✭✭
    edited December 2018
    That is what I want too. Maybe with 3.0 and multiple clients we can share receiver resources with each other for long baseline diversity.
    I have a mate 20 km east of me with a 6000 but no GPS (yet).
    Andrew VK5CV
  • PatrickPatrick WH6HI KauaiMember ✭✭✭
    edited June 2020
    Here is an idea for those that are code savy with the Rasebery computer. Interface the 10 MHz GPSDO reference and creat an NTP server with it.
  • Ted  VE3TRQTed VE3TRQ Member ✭✭✭
    edited December 2018
    oI rather doubt the internal GPSDO has the appropriate output readily available, but if you have an external GPSDO supplying the 10MHz signal, that unit likely also has an RS232 interface which can be fed into software on a computer of your choice to synchronize your clocks. The software to do that is open source / freely available.
  • nt9ent9e Member ✭✭

    Is there a way to tie a gpsdo to a PC?

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.