Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Display frequency difference between WSJT and Flex 6xxx

DonS
DonS Member ✭✭✭
edited May 2020 in SmartSDR for Windows
I am running WSJT-x v1.9.1 with the Flex 6700.  I noticed over the past month a frequency difference where WSJT-x is reporting 14.074.000 and the Flex is reporting 14.073.997.  I know this is only 3 hz, but, I have not had this issue before.  SDR v2.4.9. Any thoughts? 

Don - kx9q

Answers

  • Ian1
    Ian1 Member ✭✭
    edited May 2020
    Hi Don I had this as well if I recall problem in in WSJTX recheck in settings for a offset and make sure you have 14.074.00 setup still. Also make sure fox hound isn't on. Ian
  • DonS
    DonS Member ✭✭✭
    edited January 2020
    I checked offsets and there were none.  When I changed the frequency on the flex to 14.074.000 then the frequency displayed in WSJT-X was 14.074.003.  This occurs without any transmission.

    The frequency does not change on the Flex when transmitting, however, there is an offset from 14.074.000 to the actual frequency. So everything is keyed off the primary frequency which in this case is 14.074.000 plus the offset shown in WSJT.

    Don

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories