Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, and Tuner Genius Software?

SmartSDR v3.3.32 and the SmartSDR v3.3.32 Release Notes | SmartSDR v2.7.6 and the SmartSDR v2.7.6 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.6.24 and the Power Genius XL Release Notes v3.6.24
Tuner Genius XL Utility v1.1.8 and the Tuner Genius XL Release Notes v1.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Maestro PTT on Mic 2 not working?

N7CXI
N7CXI Member ✭✭
edited April 2019 in Maestro
I bought a used Maestro, and just wired up a W2EHY electret desk mic to it using a 3-conductor 3.5mm plug.

I turned the BIAS switch on and the TX audio is fine, but the PTT doesn't work. The PTT switch is connected to the "ring" of the plug and tests fine with a meter, but when plugged in the switch won't key the rig.

Is there anything I should check, or does it sound like PTT on the Maestro Mic 2 connector may be broken?

Thanks,
Jim N7CXI

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited April 2019
    The Mic 2 PTT is controlled by software.  

    Check the Menu setting under TX.

    Mike


  • N7CXI
    N7CXI Member ✭✭
    edited September 2018
    Thanks, Mike. I stared right at that screen and missed it.
    I'll boot the Maestro up when I go back upstairs and try it out.

    73,
    Jim N7CXI

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories