Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Brand new 6300 and NO RF Pwr or SWR meter function

Options
Member ✭✭
edited June 2019 in FLEX-6000 Signature Series
Ok, so, I am brand spanking new to the FR system and set up, but I am having a ball figuring it out. ONE minor issue, the RR Power and SWR meters do not indicate anything.  I have an inline meter which shows both being proper. Just NO indication on the computer screen meters. Be gentle now and tell me what I have not done properly. Thank you VERY much in advance!

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member ✭✭✭
    edited June 2019
    Hi Pat,

    Welcome!

    Well they should not need any tweaking or settings changed for them to work.

    In the TX slice what do you have set as your TX antenna?  It is the red one?  

    Not sure that is gonna tell us anything because you seem to imply that  you are getting power out using your external meter.

    Are you on an M series radio?  The one with the knobs on front?  You did say on the computer screen.  

    So I wonder about some network lag going on...

    Mark
  • Member ✭✭✭
    edited March 2018
    He said the 6300
  • Member ✭✭
    edited March 2018
    Mark, thank for the reply. Yes, ANT1 is red.

  • Member ✭✭
    edited March 2018
    And, no knobs on the front. FR6300.
  • Member ✭✭
    edited March 2018
    Will be away from the computer for a few hours now.
  • Member ✭✭
    edited March 2018
    Ok, I figured it out. I had the RF Power turned down to about 10W and it would not show on the display meter. Punched it up to 100W and  both of the meters started working. Go figure?  Thank you!!

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories