Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

MARS Operations with SmartSDR

2

Comments

  • dlwarnberg
    dlwarnberg Member ✭✭
    edited September 2017
    Thanks...
  • Andrew John
    Andrew John Member
    edited September 2017
    Please send copy to andrew at:
    andrew1951mdjd@gmail.com
  • KE7NUB
    KE7NUB Member
    edited October 2017
    Hello Phil and thanks for the offer of your copy. I would deeply appreciate a copy and the secret code if possible. Thank You   Duane KE7NUB     250nw@comcast.net
  • Chuck - KJ6HT
    Chuck - KJ6HT Member ✭✭
    edited January 2018
    Hi Phil,
    I would appreciate a copy.
    kj6ht@att.net
  • Andrew John
    Andrew John Member
    edited October 2017
    Hi Phil:

    I have the encryption key but have lost the message.  Could you resend to this email?

    Thanks

    Andrew
    W8OU
    AFT6AC
  • Michael Little
    edited October 2017

    Phil

    Please send me a copy.  kb2ccd@arrl.net

    Thanks,


    Mike

    AFA2ML

  • Lawrence Gray
    Lawrence Gray Member ✭✭
    edited January 2018
    Please send me a copy.  MARS license AAR1JH/T.  I'm using a Flex 6500

    W1IZZ@McPhersonDigital.com

    txs,
    Larry, W1IZZ
  • Lawrence Gray
    Lawrence Gray Member ✭✭
    edited February 2018
    Phil,

    I would really appreciate receiving a copy of the MARS setup document you prepared.  My Army MARS license in AAR1JH.  

    L.Gray@McPhersonDigital.com
    W1IZZ@McPhersonDigital.com
    lgray323@gmail.com

    Thanks,
    Larry, W1IZZ
  • David Salomon
    David Salomon Member ✭✭
    edited April 2020
    Phil -

    Could I please get a copy?  Email is ag4f at arrl dot net.  You can send it encrypted, just let me know which key to use.

    73 - David, AG4F / AAR4DS
  • Lawrence Gray
    Lawrence Gray Member ✭✭
    edited January 2020
    Does anyone have a copy of this document they can share?  I have tried to get one, but the author has not responded to requests.

    Larry, W1IZZ
  • DrJ
    DrJ Member ✭✭
    edited May 2018
    I would like a copy as well. Currently have active MARS training license. Thanks!
  • Thom Baxter
    Thom Baxter Member ✭✭
    edited February 2019
    Please send me a copy, thomas.jw.baxter@gmail.com
  • Thom Baxter
    Thom Baxter Member ✭✭
    edited February 2019
    I would appreciate a copy if you ever get one Larry,

    73 de wi4usa
    Thom
    thomas.jw.baxter@gmail.com
  • Gerold Blossey
    edited February 2019
    Hello,
    I am an AFMARS member and I would like to get a copy.  Send to gblossey117@gmail.com
  • Thom Baxter
    Thom Baxter Member ✭✭
    edited February 2019
    Me too, Thomas.jw.baxter@gmail.con
  • Steve Blankinship AG4SO
    Steve Blankinship AG4SO Member ✭✭
    edited November 2019
    Good afternoon I would be grateful for a copy as well, I am SHARES station NCS962 and have my key code for the program. Please send to AG4SO@outlook.com .
    Thanks Steve AG4SO
  • James Bebarski
    edited February 2019
    Please send me copy.
    jim@avitra.com
  • Scott - K7DSH
    Scott - K7DSH Member
    edited March 2019
    I would love a copy, I am having a difficult time getting mars software to work on my flex 6700.
    Please send to kilo7dsh@gmail.com

    Thanks,
    Scott k7dsh
  • Joel H
    Joel H Member
    edited March 2019
    Phil,
    I would like a copy please, I have my 6600M running well with M110 but always looking for improvements.  N2BOW@COMCAST.NET

    Joel
  • Igor  Rybin
    Igor Rybin Member
    edited March 2019
    Phil, Is it possible with the help of your patch to open the range of 27 MHz for transmission in Russia, as it was before V 2.32?
  • Les / W3LES
    Les / W3LES Member
    edited July 2019
    Hi Phil
    if you would please send me a copy need to connect my 6400 to smv2/dmt.
    email : lesterf52@gmail.com
    
  • Les / W3LES
    Les / W3LES Member
    edited July 2019
    Hi Phil
    if you would please send me a copy need to connect my 6400 to smv2/dmt.
    email : lesterf52@gmail.com
    
  • William Hammonds
    William Hammonds Member ✭✭
    edited July 2019
    I would like a copy Phil and thanks
    fl370@suddenlink.net

  • Joe Cooper
    Joe Cooper Member
    edited July 2019

    Please....I would like a copy also for my Flex 3000......    jackassjoe45@hotmail.com   

    Thanks....Joe, W5SSS
  • Eddie Jennings
    Eddie Jennings Member ✭✭
    edited August 2019
    Hello Phil,
         I would like a copy edwardkaren@bellsouth.net
               Thank you,
             Eddie AJ4OC
  • John WA7UAR
    John WA7UAR Member ✭✭✭
    edited February 2020
    Hi Phil. Another request please to get your document too. jspady@mac.com
  • John Watson W4JCW
    John Watson W4JCW Member ✭✭
    edited October 2019
    I'd like a copy for my 6500 please...


    w4cjwjohn@gmail.com
  • John WA7UAR
    John WA7UAR Member ✭✭✭
    edited October 2019
    @Phil/WG5D, are you available here still in this thread? I have my MARS authorization letter to confirm my association if you need it. I’m hoping to get a copy of your instructions. Or can anyone else who has it already please provide me with a cop? . Thank you.
  • John WA7UAR
    John WA7UAR Member ✭✭✭
    edited October 2019
    @Gus KF4K/AFA6GL — I have been unable to raise Phil WG5D. Are you able to provide me with a copy of the document that Phil sent to you to configure SmartSDR for MARS operation? Thanks for your help.
    John WA7UAR AAR0JS/T
  • Joseph Coffaro
    Joseph Coffaro Member ✭✭
    edited February 2020
    id like a copy for my 6400  kb2whb66@gmail.com

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.