Additional information on the new FlexRadio products...

Comments

• Ken Hansen Member ✭✭

  May 2017 edited May 2017

  Interesting, see if you can spot the typo on this page

  0
• Ken Hansen Member ✭✭

  May 2017 edited May 2017

  Mac OS support?

  0
• Lawrence Kellar KB5ZZB Member ✭✭

  May 2017 edited May 2017

  mac with Dogpark
  
  

  0
• Michael Aust Member

  May 2017 edited May 2017

  Wonder if FlexRadio could provide a Similar looking Head for my Flex6700
  as an upgrade, same head but bolted to Flex6700, with Flex6700M on it,
  bet it would generate interest and sales.
  
  FlexRadio contact me at my qrz e-mail address or my tel # on file at FlexRadio
  Mike
  WB6DJI

  0
• KY6LA_Howard La Jolla, CA. Paris and Sablet FranceMember ✭✭✭

  May 2017 edited May 2017

  Personally I am opposed to paying California Taxes or the $15/hr Minimum Wage to totally unskilled labor but I live here so I have no choice

  0
• Robert Kearbey Member

  July 2017 edited July 2017

  me too.  it just pops back

  Bob k6dds

  0
• Tim - W4TME Administrator, FlexRadio Employee admin

  July 2017 edited July 2017

  That is because the undocking of windows is not supported in version v1.x  It is supported in v2.x

  0
• Ernest Member

  July 2017 edited July 2017

  The day Flex comes out and offer a small mobile radio; I'll be the first one in line to buy it.
  Then I'll dump my IC-7100.  
  If you collect  IOTA, I am available from NA-138 Amelia

  0
• Bob G W1GLV Member ✭✭

  July 2017 edited July 2017

  I second that decision, worst radio I ever bought.

  0
• Ria Member ✭✭

  July 2017 edited July 2017

  I am confused. I thought that panadapters were the container and slices were the individual "receivers." This would mean that slicese are in panadapters. 

  0
• Larry - WA7LZO Member ✭✭

  July 2017 edited July 2017

  I hope it will have a standard tuner interface, such as the 4-pin Icom protocol. This would provide for maximum flexibility for the most complex aspect of an HF mobile radio installation, the mobile antenna. Screwdriver antennas are OK for mobile HF, but you can't beat a great HV autocoupler, like the Icom AH-4 with a 9 ft whip, or the AH-740, or a super high speed screwdriver, like an AH-760. These all use the Icom 4-pin tuner interface.
  

  0