Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Need some help to finish setup my SPE 1.3K

YV5WZ
YV5WZ Member ✭✭
edited December 2019 in FLEX-6000 Signature Series
Hello!!...6300 + SPE Expert 1.3Kfa

well, finally I decided to give up Dan's cable...It was working...following TXslide...tuning through SPE software but I wanted to continue using my DDutil 3.2.5.01.....I made the cable according instructions......and good,  turn on and off  Amplifier, Input change .....Standby to  Op.....shows temperature, change bands.....but.....not tune,.....I click the button...SPE Beeps.....but no RF go to amplifier to tune.....flex doesn't respond to.... I double check phono cable from relay to TX on my flex.....with Dan's cable everything was working smoothly ...now....I did a mess...

Any advice? 

George, YV5WZ / PY3ZZZ

Answers

  • Wayne VK4ACN
    Wayne VK4ACN Member ✭✭✭
    edited March 2019
    George
    Im not using ddutil at the moment, but when I got my spe I had a similar problem.
    Ddutil will turn off the tx1 enable on the flex.  Go to the ddutil>setup>autodrive tab on the left side its one of the boxes needs to be ticked.  I have manual tx ticked atm, it may be that one but im not sure if thats the one, as im not using it.  I use the spe with the usb cable to control it. Someone else will probably chime in with the answer, but try that
    73
    Wayne


    image
  • YV5WZ
    YV5WZ Member ✭✭
    edited December 2019
    Thank you Wayne.....You got a Homerun.....certainly RCA TX1 is being Disable.... I appreciate your advice!!  Thank you

    George, YV5WZ  
  • Wayne VK4ACN
    Wayne VK4ACN Member ✭✭✭
    edited March 2019
    No probs
  • Ria
    Ria Member ✭✭✭
    edited December 2019
    When you press tune on the amp you have to manually press tune on SmartSDR. Once tuned it's in the memories and once you have a CAT cable it will detect the frequency and automatically recall the tuner setting from memory.
  • YV5WZ
    YV5WZ Member ✭✭
    edited May 2017
    I do.....what I found is that RCA TX goes to disable any time I change band...:(  
  • Ria
    Ria Member ✭✭✭
    edited May 2017
    Oh, that. If you're using DDutil you need to disable "bypass on band change" which is designed to protect tube amps from forgetful operators who may just change bands and then forget to retune their amp.

    Uncheck the box that says "BOBC" and it shouldn't do that anymore.
  • YV5WZ
    YV5WZ Member ✭✭
    edited May 2017
    its uncheck.......:(

    funny
  • YV5WZ
    YV5WZ Member ✭✭
    edited December 2019
    Ready!!!  now its working
    as Wayne said...Manual TX must be check and 1 Key line Unmark
     1st Problem solved

    Thanks

    George, YV5WZ / PY3ZZZ

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories