Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flexradio 6300 lost all setting

Roy FinchRoy Finch Member

Hi there,

Just wanted to ask if anyone else has ever seen their Flex 6300 not boot up then take for ever to boot up and when it did boot up all settings were missing including profiles static ip address ect. I managed to get it all back up and running but I am concerned there may be an underlying issue.

Roy

2E0DNH

Answers

  • Jim GilliamJim Gilliam Member
    edited May 2017

    As a wild suggestion, it could be your powersupply in not clean or, perhaps, intermittent. I wouldn't hurt to check with another power supply.


    Jim, K6QE

  • Roy FinchRoy Finch Member
    edited May 2017
    Thanks for the suggestion, I take it you mean the internal PSU?
  • Tim - W4TMETim - W4TME Administrator, FlexRadio Employee admin
    edited May 2017
    Can you estimate how long it took to boot and was the power LED blinking?
  • Roy FinchRoy Finch Member
    edited May 2017
    OK this has now stopped booting up and when trying to do a factory reset by holding the on/off button for five seconds the white light starts flashing but then the radio just sits there. been left on in this state for 15 minuets? So I have opened a service call. do all uk rigs still have to go to Germany for repair/servicing?

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.