Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

PowerGenius XLTM and PoE

Options
k3Tim
k3Tim Member ✭✭✭
edited June 2020 in New Ideas
Since the amp uses 48V DMOS transistors and PoE is 48V it would be great if the amp could run from the PoE and not have to run a separate power line. Please vote for this idea.

FYI: at a certain So CA semiconductor house a large NXP tractor trailer was seen. Me thinks he was loading a truck load of the aforementioned transistors and heading over to Austin way.

image
0
Up Down
0 votes

In Review · Last Updated

Comments

  • Rob Fissel
    Rob Fissel Member
    edited March 2017
    Options
    Huh?
  • k3Tim
    k3Tim Member ✭✭✭
    edited May 2020
    Options
    It's an April 1st warm up attempt at humor.


  • Rob Fissel
    Rob Fissel Member
    edited March 2017
    Options
    Whew, you had me worried. A few days early, eh? 

    I'll play too. 

    Hey Flex - Please allow the use of RTL-SDR sticks on the USB ports for the 6300 and the 6500 to add a separate SCU, like the 6700 has. I know about technology and this is an easy hardware implementation. Please vote for this idea. 
  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    Options
    Totally off-topic, but that is one gorgeous tractor.  Looks like maybe a KW T680 w/76" sleeper.  Just beautiful...
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Options
    NEWS FLASH!

    FlexRadio submits a proposal to the IEEE for a new PoE standard, defined as 802.3at-2017 known as "Mack Daddy PoE" that provides up to 2.2kW of power @ 220V.  This new standard will require CAT2974 cable, which is 128 twisted pairs consisting of 10 AWG solid or stranded copper wire and will support the emerging 10,000,000 Gigabit Ethernet standards.  Watch this site for updates and approval status.
  • Patrick
    Patrick Member ✭✭✭
    edited June 2020
    Options
    48 Volts from the amp would be a problem from the point that it would be difficult to isolate RF feed back th at may travel as conducted and common mode RF.  The 48 Voltage needs to be stable for the amp only.  
  • k3Tim
    k3Tim Member ✭✭✭
    edited May 2020
    Options
    Rob: That's an interesting idea you have there. If one could run multiple sticks, these could be used to watch for band openings and/or MW/SWL and not waste a more capable slice.

    Rick: The tractor is a beauty. The trailer would make a great camper. The top extends up and there was also a deck on the roof making for a three deck camper.

    Tim: Hope the proposal is accepted.  :-)


Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories