Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Fantastic app but I have lost the audio on the ipad 3 - what to do?

Kari Gustafsson SM0HRP
Kari Gustafsson SM0HRP Member ✭✭
edited December 2019 in FLEX-6000 Signature Series
I jost go this installed with help from Marcus. His support is just awesome. Since I alss work with a Maestro and you toggle between local mode (on Maestro) and remote audio (on 6700) I could have changed settings with this app. now. I cannot get any audio from the app. eventhough all seem OK like "speaker on". What can it be? Is there a "remote audio" setting somewhere? 
I use an old Ipad gen. 3 and 3G and it works very well.

Answers

  • Kari Gustafsson SM0HRP
    Kari Gustafsson SM0HRP Member ✭✭
    edited December 2019
    I solved it by placing the radio in remote mode (by connecting over PC). Perhaps it can be made in the app as well. 
  • ThisUserDoesNotExist
    ThisUserDoesNotExist Company Adviser ✭✭
    edited December 2019
    Hi again Kari. Most likely the cause is one of the following (in the order of likely-hood):

    - You switched off remote Audio (check by tapping the left Audio Menu and check if the upper switch is switched to on)

    - Slice audio disabled or low gain (check by tapping the slice flag, then Audio, then Check volume and volume switch)

    - Physical device audio too low or muted (check by using the physical audio buttons on your device. There is no way to change the main device volume via software so you have to use the physical buttons to control the main device volume)

    Finally, there are a few other settings you can check if audio still doesn't work:

    - Speaker volume adjustment in the App settings

    - Default to Speaker setting in the App settings

    - Mute button at the top (but you wrote that this is on)

    vy 73,
    Marcus, DL8MRE
  • ThisUserDoesNotExist
    ThisUserDoesNotExist Company Adviser ✭✭
    edited February 2017
    Kari, this is what I did mention in my answer to you. First point.

    vy 73,
    Marcus, DL8MRE

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories