Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Bluetooth not work on iOS app

Member ✭✭
edited June 2020 in SmartSDR for iOS
I update to 1.0.7 iOS app SmartSDR but now no Bluetooth connection work....

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Company Adviser ✭✭
    edited December 2019
    Hi Frank,

    can you please check the following and let us know if this helps:

    No Bluetooth Headset output
    • Ensure you have audio even without the Headset
    • Ensure you have audio on your Headset without using the App
    • Ensure the Setting "Default to Speaker" in the Settings screen is switched off
    • Ensure audio gain of the headset is set high enough
    • Toggle the top speaker icon to mute and un-mute to see if the Headset starts working then
    • Use the control center (opens when sliding in from the bottom) to double check if your Headset is available for selection and is selected for audio output
    thank you!

    vy 73,
    Marcus, DL8MRE
  • Member ✭✭✭
    edited April 2020
    Frank, i have no problem. Works well here. 73 Chris
  • Member ✭✭
    edited June 2020
    Sorry guys I face the same problem. Chris which kind of device are you using with BT? Thanks in advance. 73, Luciano
  • Company Adviser ✭✭
    edited October 2016
    Luciano, just for curiosity, did you check the above ?
    vy 73,
    Marcus
  • Member ✭✭
    edited December 2016
    Not yet Marcus, I'll try this evening when I go back home, but I asked Chris because of I am not sure about my device (an old Logitech BT headset).
    I'll tell you asap  
    73 and tnx
    L. 
  • Member ✭✭✭
    edited December 2016
    Luciano, it's a older Jabra device (have to check what model - it's not printed on it). Works well also with my Samsung S6 and, if i like, with my TomTom bike navigation system too. I know, most of the BT devices have different handling to pair. ... press button longer then xx Sec till LED flash 3 times then press .... then give code 0000 :-(

  • Member, Super Elmer Moderator
    edited October 2016

    I had same problem. Wound up I had to click on left menu button and go to audio to turn it on. Once I did that it worked fine.


    Dave wo2x

  • Member ✭✭
    edited October 2016
    All ok work! I see disable on Audio Tab "Audio device"

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories