Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Connecting 6500 to Maestro & Computer

Joe - N7IV
Joe - N7IV Member ✭✭
edited February 2019 in FLEX-6000 Signature Series
I just unpacked the Maestro and 6500, connected then with the CAT-5 and connected the MIC, phones, and key directly to my 6500.  It all works great.  The problem is that the only CAT-5 connection on the 6500 is no longer available for connecting to my computer for N1MM+ access and keying.  Is there a way to connect the 6500 directly to both without adding a hub (use the USB ports???).   

Answers

  • KY6LA_Howard
    KY6LA_Howard La Jolla, CA. Paris and Sablet FranceMember ✭✭✭
    edited January 2017
    Not that I know of. Just add a n Ethernet switch. It's no big deal.
  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019

    Exactly, use a switch. You will want to have a DHCP server in the network reserving addresses for each unit, or manually assign IP addresses, though. Makes life easier.


  • Joe - N7IV
    Joe - N7IV Member ✭✭
    edited September 2016
    Thanks guys.  That's what I thought, although I held out hope that the USB ports on the rig might work too or that the wireless LAN-connected computer could talk to the 6500 through the wireless Lan-connected Maestro.  I'll buy a switch and assign the 6500 an IP number.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.