Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

SmartSDR 1.6.21 - a sneak peek

Tim - W4TME
Tim - W4TME Administrator, FlexRadio Employee admin
edited May 2020 in New Ideas
We will be releasing SmartSDR v1.6.21 later this week, so it is time for another installment of the Release Sneak Peek Series.  SmartSDR v1.6.21 is a v1.6 maintenance release containing fixes for several class 2 defects (major) and several additional minor defects. This release does not contain any new features.  The SmartSDR v1.6.21 Release Notes are available for download for your review.  As with most releases, there are updated versions of the SmartSDR for Windows Software User's Guide and the FLEX-6000 Family Hardware Reference Manual available as well.

The SmartSDR v1.6.21 Change Log detail is listed below.

-------------------------------------------------------------------------------
 v1.6.21 2016-02-08
-------------------------------------------------------------------------------
#2954    CWX: Fixed an issue that could cause delay in sent CW message
#2970    Fixed broken P/CW button on TX Sidebar
#2976    Fixed obscured PROC and MON numerical popouts on sliders

-------------------------------------------------------------------------------
 v1.6.20 RC 2016-01-26
-------------------------------------------------------------------------------
#2883    Fixed a radio crash when using Remote Audio for more than 8 hours
#2896    EU 1750 Tone Burst control no longer overlaps other controls
#2868    Fixed misaligned PROC controls

-------------------------------------------------------------------------------
 v1.6.19 RC 2016-01-22
-------------------------------------------------------------------------------
#2905    Fixed issues with the ATU not recalling memories after bypass correctly
#2889    Fixes a radio crash when importing/exporting a large number of profiles
#2906    Now allowing hardware override of DAX TX audio in DIGx modes and override can now be triggered by ACC TX
0
Up Down
0 votes

Completed · Last Updated

Comments

  • Richard G7EIX
    Richard G7EIX Member ✭✭
    edited March 2017
    You have a bad link for the hardware manual in the mailshot.... not here, just the mailshot from GetSatisfaction.

    http://www.flexradio+.com/downloads/flex-6000-hardware-reference-manual-pdf/
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    Interesting.  The URL in the editor was correct.  I replaced it anyway so it should work now.  Thanks for the heads up.
  • Lou N2TU
    Lou N2TU Member
    edited February 2016
    Tks Tim! See you in Orlando?

  • Dave Dave
    Dave Dave Member ✭✭
    edited February 2016
    Fixed TX at startup where it should show "ready" or "not ready" but is blank?

  • Walt
    Walt Member ✭✭
    edited July 2017
    Thank you very much, Tim.  

    It is always nice to get a little homework before the software is released.

    Cheers !
  • rfoust
    rfoust Member ✭✭
    edited March 2017
    Thanks for sharing the info Tim!
  • k3Tim
    k3Tim Member ✭✭✭
    edited May 2020
    The sneak peak is always appreciated - allows time to read an ponder the update and procedure.

    k3Tim
  • Rob N4GA
    Rob N4GA Member ✭✭
    edited January 2017
    Awesome, Tim, thanks.
  • Verne Eastwood K4VAE
    Verne Eastwood K4VAE Member ✭✭
    edited February 2016
    Neat Stuff Tim.  Thanks for the heads up.  Hope to see you guys in Orlando.

    73
    Verne / K4VAE
  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019
    Whoo hoo! 2883 had been particularly annoying for me running remote. many thanks, team!
  • dlwarnberg
    dlwarnberg Member ✭✭
    edited May 2019
    So is it just me or is everyone checking to see if the update is out yet???   :-)
  • G4NRT
    G4NRT Member ✭✭
    edited May 2020
    Not just you David - I was speculating on what "later this week" means!!
  • DrTeeth
    DrTeeth Member ✭✭
    edited August 2016
    "Later this week" = "now" + 1 minute
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    "Later this week" != "_yesterday" 
  • Ted_Spiegel_NX6C
    Ted_Spiegel_NX6C Member ✭✭
    edited December 2016
    Tim,
       Thanks for making me look up !=.
    Ted
    NX6C
    :-)
  • k3Tim
    k3Tim Member ✭✭✭
    edited December 2016
    How about  

    "Later this week"  .NE.  "yesterday" 

    instead
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    "Later this week" != "_rightNow"

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories