Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

CW SYNC OPTION

Steve K8DZ
Steve K8DZ Member ✭✭
edited January 2019 in New Ideas
I operate VHF a lot and sometimes a station will switch from SSB to CW without a major freq change. I suggest an option where going to CW mode shifts frequency by 600 Hz so station is still in passband without touching tuning of radio. Icom radios do this.
3
Up Down
3 votes

Open for Comments · Last Updated

Comments

  • K5CG
    K5CG Member ✭✭
    edited October 2018
    The Kenwood TS-480 will center the CW station at your sidetone audio frequency if it hears a CW signal on 300Hz either side of it. Seems like it's been done before and ought to be pretty east in software. :)
  • Steve K8DZ
    Steve K8DZ Member ✭✭
    edited January 2019
    Yes, not original idea at all. Icom radios do this (can switch feature on or off in a menu). Exact offset should be equal to sidetone freq. 
  • Steve Jones gw0gei
    Steve Jones gw0gei Member
    edited January 2016
    Agreed my pro 3 did it and very useful on 6m and transverting onto 4m. As i plan a further upgrade to a 6700 in the spring it would be needed for 2m work too as i often switch modes to cw to finish a fading dx or contest qso.
  • K5CG
    K5CG Member ✭✭
    edited October 2018
    The real operating upside would be that you could narrow the CW filter further and you wouldn't have to hunt around to keep it in the center of the passband. The signal would stay centered in the filter as you narrowed it.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    This too is in our feature enhancement database.  It is the auto zero beat feature

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories