Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Does anyone own the GPSDO unit?

Options
Nicholas Parry
Nicholas Parry Member
edited May 2019 in FLEX-6000 Signature Series
Does anyone know if this would be worth worthwhile installing the GPSDO into the 6700.  As frequency stability is excellent without this unit it appears to be unnecessary expense?  But this would add GPS to the radio (positional information etc.) to the radio which may increases the radios functionality with future software updates?   

Thanks, Nick, M0 NAG   

Answers

  • kr4k
    kr4k Member ✭✭
    edited September 2017
    Options
    Have two that I use. The one on my 6700 today is a Jackson-Labs Fury, providing an external 10 MHz reference. My other external reference is a tenMHz LPRO-GPSDO reference oscillator with rubidium oscillator.

    I suspect that by adding the internal GPSDO, Flex's firmware will eventually allow for accurate time stamping of the VITA-49 streaming IQ. That would be a really great feature.

    73/gus
    Dr. Gus Lott, KR4K
  • Reg
    Reg Member ✭✭
    edited March 2017
    Options
    My view of the FLEX GPSDO is that it is a high quality frequency reference.  It is manufactured for FLEX by Jackson Labs.  Jackson Labs is known as one of the highest quality manufacturers of GPSDO devices.

    Today a stable signal is essential for certain weak signal modes and for driving transverters for use on VHF/UHF/microwave bands.  In addition to providing a frequency reference for use inside my FLEX-6700, the FLEX GPSDO also provides a 10 MHz reference signal output for use with other devices.

    The 10 MHz reference out from my GPSDO feeds a Stanford Research Systems FS-730/1 10 MHz distribution (and buffer) amplifier.  The FS-730/1 has 7 outputs which replicate the reference signal, buffer the signal, and provide channel to channel isolation.  This prevents noise from any connected device from being re-transmitted to other connected devices.

    I use the outputs from the FS-730/1 to feed reference signals to other transceivers (TS-990S, K3s, & IC-7800) and to test equipment (spectrum analyzer, oscilloscope, and arbitrary function/waveform generator.)

    In the future the FLEX GPSDO may be important for use with new modes or software.  For now, it provides me with a high quality 10 MHz reference source for use with 6 other pieces of equipment.

    Reg  
  • Jay Nation
    Jay Nation Member ✭✭
    edited May 2019
    Options
    Nick 
    I like my GPSDO. It's keeping things calibrated for now. In the future it has been suggested that it might be used to provide additional features. Such as serving as a timing source for your PC, And possibly allowing us to sync our receivers to other remote 6XXX series receivers, maybe for diversity reception, or Beam Steering.

    73, Jay - NO5J 

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories