Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need the latest SmartSDR and Power Genius Software?

SmartSDR v3.1.12 and the SmartSDR v3.1.12 Release Notes. | SmartSDR v2.6.2 and the SmartSDR v2.6.2 Release Notes.
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes. | Power Genius XL Firmware v3.5.23. | Power Genius XL Utility v2.2.10.

Odd behavior when offset for wsjt-x is greater than 3k...anyone else see this?

mdavid01
mdavid01 Member
edited January 2018 in FLEX-6000 Signature Series
I've been spending a lot of time using WSJT-X for JT-65 and JT-9. Enjoying digital modes more than I anticipated.

I've noticed that every so often when the offset is greater than 3k the flex will show the red TX transmit, however in the waterfall it shows no signal and nothing noted in panadapter either.

Here is what SmartSDR looks like during this event
image

Anyone else notice this behavior with WSJT-X and SmartSDR?

Completed · Last Updated

Answers

  • Cedric HB9HFN
    Cedric HB9HFN Member
    edited December 2015
    Set your TX High Cut > 2900 (e.g. 4000)!
  • W7NGA
    W7NGA Member ✭✭
    edited January 2018
    What Cedric says and don't forget to setup a JT65 profile otherwise it will be a recurring problem. I tend to forget to enable DAX as source on transmit when bouncing from JT65 and SSB modes.
  • mdavid01
    mdavid01 Member
    edited November 2015
    Dang that was fast for the exact right answer!  Thanks!
  • Phil M0VSE
    Phil M0VSE Member ✭✭
    edited September 2016
    Another fix for this is to use the fake split mode of WSJT-X, this will automatically increase or reduce the frequency enough to keep the transmit signal at around 1.5k and return to the correct frequency on receive.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Home • FLEX-6000 Signature SeriesComment As ...

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register
New Discussion Ask a Question

Categories