Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

No transmit on 10 meters

N3NER
N3NER Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
I just tried 10 meters for the first time since I purchased my 6300 back in June and it has no transmit output (the relay does key) and from what I can tell, no receive, just some hiss from the noise floor. 

Comments

  • Doug Hall
    Doug Hall Member ✭✭
    edited February 2017
    Make sure the transverter port is not selected under antennas.
  • N3NER
    N3NER Member ✭✭
    edited March 2018
    Thanks, that was it...  Now I feel like a total idiot!
  • N3NER
    N3NER Member ✭✭
    edited March 2018
    I ran a transverter at one point, never thought about changing the ant back.  
  • Doug Hall
    Doug Hall Member ✭✭
    edited February 2017
    Yep, I looked at your qrz.com page and saw that you had a 2m transverter and the light went on... I've done the same thing. Setting up profiles for each band will help avoid it in the future. 
    73,
    Doug K4DSP

  • N3NER
    N3NER Member ✭✭
    edited March 2018
    Thanks for the heads up, one of those things.  Getting old does not help! lol
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    Been ther, done that, also. I have also wondered what happend to my dipole when I couldn't hear anything. Only to find that I had it in RXA for my receive loop that I had disconnected the week before during a lightning storm....

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories