Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

No transmit on 10 meters

Options
Member ✭✭
I just tried 10 meters for the first time since I purchased my 6300 back in June and it has no transmit output (the relay does key) and from what I can tell, no receive, just some hiss from the noise floor. 

Welcome!

It looks like you're new here. Sign in or register to get started.

Comments

  • Member ✭✭
    edited February 2017
    Make sure the transverter port is not selected under antennas.
  • Member ✭✭
    edited March 2018
    Thanks, that was it...  Now I feel like a total idiot!
  • Member ✭✭
    edited March 2018
    I ran a transverter at one point, never thought about changing the ant back.  
  • Member ✭✭
    edited February 2017
    Yep, I looked at your qrz.com page and saw that you had a 2m transverter and the light went on... I've done the same thing. Setting up profiles for each band will help avoid it in the future. 
    73,
    Doug K4DSP

  • Member ✭✭
    edited March 2018
    Thanks for the heads up, one of those things.  Getting old does not help! lol
  • Member ✭✭✭
    edited June 2020
    Been ther, done that, also. I have also wondered what happend to my dipole when I couldn't hear anything. Only to find that I had it in RXA for my receive loop that I had disconnected the week before during a lightning storm....

Leave a Comment