Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

SmartSDR v1.4.0 No Transmit Power Output on FM

K9DUR
K9DUR Member ✭✭
edited February 2019 in SmartSDR for Windows

Loaded SmartSDR v1.4.0 onto my FLEX-6700, s/n 1713-3011-6700-4673. 

I decided to try out the new FM capability.  I went to 29.600 MHz on 10m & also to 52.525 MHz on 6m.  In both cases, the panadapter shows carrier when I key the rig & sidebands when I talk, but external power meter shows 0 Watts out.

73, Ray, K9DUR

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Cold boot the radio by powering off and removing DC power for 15-30 seconds.

  • K6OZY
    K6OZY Member ✭✭✭
    edited February 2017
    I cannot confirm this behavior.    My FM puts out power and I can key a local 10M or 6M repeater.  Perhaps backup your profiles, reset the radio to defaults, try again.  Import profiles after testing to verify a profile isn't the cause if Tim's suggestion doesn't work?

    PS.  Your software is awesome.  Thank you for contributing to the community.
  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019
    I had to toggle the RPT controls a couple of times to get things. Once it kicked in, it's been sweet.
  • K9DUR
    K9DUR Member ✭✭
    edited January 2017

    Okay, Tim,

    I get 30 lashes with a wet noodle!  Found out no power out in any mode.  So, I was in the process of doing exactly that when I read your reply.  I had meant to do a cold reboot of the radio after the install, but was so anxious to try out the new "stuff", that I forgot.  All is well now. Thanks.

    73, Ray, K9DUR

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories