Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

2 METER PANADAPTER DISPLAY ON TRANSMIT

Drax
Drax Member
edited March 2017 in FLEX-6000 Signature Series
Is the panadapter on a 6700 supposed to display the 2 meter TX spectrum like it does when transmitting on HF?  Mine just freezes until the TX is unkeyed,

Answers

  • pa0bie
    pa0bie Member
    edited January 2015
    The panadaptor does not display the XVTR output.  That is the normal situation.
  • Joe - KC2TN
    Joe - KC2TN Member ✭✭
    edited March 2017
    Is this a permanent design? Or is it one of those "used to work" features in PSDR that will be put into SSDR when it catches up!
  • pa0bie
    pa0bie Member
    edited January 2015

    Since when do I give a " OFFICIAL RESPONE "  ?

    During transmit the panadator displays a signal what is taken off throug an attenuator from the FLEX-PA. That is internal hardware.  The intension was ( is ) to use this signal for pre distorsion the input signal to the PA to improve the IMD. Of course that would not work as soon as You place another PA behind Your Flex.

  • Joe - KC2TN
    Joe - KC2TN Member ✭✭
    edited March 2017
    Would there be no value or possibility to pick up a signal from the transverter port in transmit mode? Thanks for the Official response LOL,
  • pa0bie
    pa0bie Member
    edited January 2015

    As I said , that needs a hardware modification.  I do not expect that it would be easy or possible. Perhaps in the 7000 serie !

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories