Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Peripheral Control

Options
Howard K2AQ
Howard K2AQ Member ✭✭
edited March 2017 in New Ideas

Over the years I had Icom products and implemented CI-V data
to control my antennas.  Now that I am a Flex’er, it would nice to have both the CI-V as well as the Alpha amp interface resident in the Flex.  I am having trouble with the PC system freezing after a period of time when running DDUtil.  Just running the Flex-6500/SDR and it will operate flawlessly forever.  PC is an Abro-Neal supplied machine, plenty of power and Ram etc. Both Neal and Steve have invested time without success with this difficult problem.  I would be great to utilize the USB ports on the Flex for these types of protocol communications. How about it Flex? Seems like it is time to provide.!

1
Up Down
1 votes

In Review · Last Updated

Comments

  • Al_NN4ZZ
    Al_NN4ZZ Member ✭✭✭
    edited March 2017
    Options
    Hi Howard,
    Peripheral control -- This link below is about 8 months old but there is a good discussion on the options.

    https://community.flexradio.com/flexradio/topics/band_data-3xef1?topic-reply-list%5Bsettings%5D%5Bfi...

    I suspect if has been on the back burner (i.e. a lower priority) for a few reasons.

    - DDUtil works well for most peripherals and users

    - The "no local PC" goal will be more important once WAN remote is ready.  (not having to use a local PC to control you amp, etc will mean less thing to deal with remotely)

    This would be another one of those features that would be good to see on the new 2.x road map.  And since 2.x is the WAN remote release, it seems to fit.

    Regards, Al / NN4ZZ  
    al (at) nn4zz (dot) com


Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories