Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

"Tune" and "ATU" on SSB should be zero beat.

Ken - NM9P
Ken - NM9P Member ✭✭✭
edited June 2020 in New Ideas
One of the things I loved about my Kenwood TS-850SAT was that when I entered the "Tune" function, the carrier was zero beat to the stations I was listening to. This tended to reduce interference to them and to the folks on the next frequency because it was too high a frequency to bother them, usually. It was especially handy on 40 - 160 rag chew frequencies and nets. Could this be implemented for "Tune" and "ATU" when on SSB in the 6000 series, or perhaps make the "tune" offset adjustable for those who wish to do it this way?
5
Up Down
5 votes

Completed · Last Updated

Comments

  • W0DHB
    W0DHB Member ✭✭
    edited November 2016
    Another vote for this.
    This is the way PowerSDR functions today.
    Makes it nice for calibrating UPlink/Downlink when using satellites in addition to not interfering.

    I'm so used to PowerSDR doing this I've had to apologize quite a bit  :-)
  • k0eoo
    k0eoo Member ✭✭✭
    edited June 2020
    Hi Ken, This question came up back in the beginning with no response from Flex.  I think if Flex could have made Tune in the 6000 work the same as in PSDR they would have...  My guess is the FPGA and/or the DUC technology may require a tone to imitate transmit or be required by one of the algorithms....  Maybe Flex will respond to your asking the question....
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    The response will come shortly, like in the next version of SmartSDR.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    I need to wipe the egg off my face and spit out the crow feathers,  The program change to set the tune frequency on the carrier did not make the cut for SmartSDR v1.2.17.  It is slated for 1.3 due out later this month. Sometimes you get confused what is slated for one release when you are working on two at one time.   Sorry, my bad. 
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    That's OK, Tim.  I wasn't expecting v.1.2.17 anyway and assumed your previous comment meant v.1.3 at the end of July.  I won't be able to try v. 1.2.17 until Saturday in any case.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories