Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex 6700 in contest environment

WX7Y
WX7Y Member ✭✭✭✭
edited June 2020 in FLEX-6000 Signature Series

Relay clicking when a close Antenna from another radio is Transmitting when receiving with the FLEX6700.

I HOPE this is some kind of protection for the FLEX6700 but I could be wrong, this happens from 80 watts and up with the other operator transmitting which pulses the Relay on the FLEX on voice peaks from the other Transmitter when the FLEX is in Receive mode. 

So far this has not hurt the Receiver but I don't want to trash the FLEX if this is a problem using it in close proximity to another operator.

Thanks for any in-site on this

Answers

  • Gerald-K5SDR
    Gerald-K5SDR FlexRadio Employee ✭✭
    edited April 2019
    That may be the reverse power protection relay that kicks in somewhere around +24 dBm.  
  • WX7Y
    WX7Y Member ✭✭✭✭
    edited June 2020

    That makes sense, I am sure it was at least +24 dbm,

    Will it hurt anything or is there any external device I should purchase that you know of to help protect the 6700 from the high power like we use to use in the olden days with a couple back to back Diodes in the receiver loop?

    Thanks again

    Bret WX7Y


Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories