Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Antenna 1/2 interface

Tom--W4FAS
Tom--W4FAS Member ✭✭
edited July 2018 in FLEX-6000 Signature Series
I was copying a strong signal at 10 over. I then switched to antenna 2 to see how my other antenna was doing. It was weaker than I had expected at S3+. When I looked at the antenna 2 connector  there was no antenna connected. Why should I have heard anything? 

Answers

  • Jon_KF2E
    Jon_KF2E Member ✭✭✭
    edited July 2018
    I use a quadra amp which has four antenna ports. I swear that sometimes strong signals sound better on a port with no antenna. I suspect the isolation between the ports is such that you are still seeing the signal. I don't think this is a problem.

    Jon

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    There is not 100% isolation between antenna ports so you will hear strong signals on an unconnected antenna port.  Like Jon said, this isn't a problem.
  • rfoust
    rfoust Member ✭✭
    edited March 2017
    I noticed this a few weeks ago too when I was messing around with antennas.  Thanks for the answer, Jon and Tim.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories