Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

pinout for front panel mic connector

Don WB3FTQ
Don WB3FTQ Member ✭✭
edited November 2015 in FLEX-6000 Signature Series
on the Flex 5K the front panel mic connector pinout is the same as on Yaesu rigs (if memory serves). i need an 8-pin connector to RJ45 to connect to the Rig Blaster. i will also have to set the jumpers in the RB correspondingly. also, i assume that the pinout view in the hardware manual is looking into the front panel, is that a correct assumption? i know i could look up the pinouts for Yaesu and compare them for myself but if someone already knows it will save me a lot of time. 73

Answers

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.