Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

How do I turn down VAC 1 on Flex5K

Bill-W9OL
Bill-W9OL Member ✭✭
edited October 2016 in FLEX Series (Legacy) Radios
Recently the audio for VAC 1, my input has become REALLY hot.
Sure it wasn't so hot before.
I now have to adjust VAC RX Gain to -40 which is the softest setting.
The bloom just overcomes the mark and space display on receive.
Transmit is fine.

Been doing a lot of JT and PSK lately, I don't remember changing anything but maybe I did and don't remember.
Forgive me, that second TIA has left me with some 'bewilderment' problems. :-((

Looking for suggestions here....
tu in advance

Answers

  • Neal_K3NC
    Neal_K3NC Member ✭✭
    edited March 2014
    Bill, what do you have the AGC-T gain set to? Cut it waaaaaaaayy back and see if that helps.
  • Bill-W9OL
    Bill-W9OL Member ✭✭
    edited October 2016
    For a normal setting that I hear comfortably, I have AGC-T between 75 and 95.
    That's a soft normal for both speaker and headphones.
    Right now I hav VAC1 RXGain at -40.
  • Bill-W9OL
    Bill-W9OL Member ✭✭
    edited October 2016
    I'm trying to work the ZL7 on 12 rtty. It's a bit too early but it's one of the few bands I still need them on rtty.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories