Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Marker Lines

pa0bie
pa0bie Member
edited June 2020 in New Ideas
I would like to see the possibility for some markers lines on de panadaptor display. At least one horozontal and two verical. This specialy for searching and eliminating QRM. Jan , pa0bie

Comments

  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    WOW! that looks like the ruckus the under-counter halogen lights in my kitchen make whenever my wife turns them on. It is also similar to the noise my router/switch makes.
  • Ed baker
    Ed baker Member ✭✭
    edited September 2016
    I think you can use the bottom of the display One Horizontal line less . The 2 sides well Have to really really think about that .For me NO
  • pa0bie
    pa0bie Member
    edited January 2014
    I was just thinking about one horizontal and two vertical colored and or dotted lines. The values belonging to it could be placed in a small text window somewhere on the screens. f.i. M1= -45 dBm. , M2= 3.604 KHz. , M3= 3.635,15 KHz. , Delta 2-3 = 31.15 KHz. Also a different colored FREEZE of the display as an overlay on the panadaptor would be very helpfull in finding the QRM source. The FLEX will than have even more possibilitys then an Spectrum Analyser.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.