Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Shutting Down... "Error PSH5V3-5.87" when powering on ? Should I be concerned ? or report ?

James Nelson
James Nelson Member ✭✭
edited January 2018 in SmartSDR for Windows
When powering on today the 6700 display gave me "Error PSH5V3-5.87" can someone tell me if this is a big deal or just dismiss as a glitch and grab another coffee ?

Comments

  • W0QKL
    W0QKL Member
    edited January 2014
    If I remember there was a posting a long time back I believe it has to do with a voltage problem you might want to do a little searching on voltage problems. The flex people can tell you for sure what it is.
  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    Shutting Down... "Error PSH5V3-5.87" means that the nominal 5.3volt buss is seeing a high out-of-tolerance reading of 5.87 volts. My 6500 is currently in Austin being checked for the opposite problem, occasional low-voltage errors on the 13-volt buss, "PSL" rather than PSH errors. I'll let you know if they are able to track down the sources of the problem.
  • James Nelson
    James Nelson Member ✭✭
    edited June 2017
    Good information Rick, not sure if I feel like raising a support ticket as I have only seen it 4 or 5 times in many hours of operation.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    James, I have changed this post to a problem topic and converted this topic to a support HelpDesk ticket (http://helpdesk.flexradio.com) for expedited issue resolution. If anyone else is experiencing an issue similar to this one, please submit a HelpDesk support ticket for issue resolution.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories