Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

X/RIT works but how do you revert back to tuning with the FlexControl? Mine stays in XIT or RIT mode

Craig K9CT
Craig K9CT Member ✭✭
edited June 2020 in SmartSDR for Windows

Answers

  • Dave - WB5NHL
    Dave - WB5NHL Member ✭✭
    edited December 2014
    See http://community.flexradio.com/flexradio/topics/flexcontrol_lock Basically double click button to restore or push control knob
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    If you single-click AUX 1 it turns RIT on. and the big knob tunes the RIT. If you double-click AUX1 it turns RIT off. and the big knob tunes the slice. The Light by the AUX 1 button will toggle with the status of RIT The same for AUX 3 and XIT... Hope this helps.
  • Greg
    Greg Member ✭✭
    edited December 2013
    Now that RIT/XIT are working, does anyone know if there is a CAT command for CLEARRIT? This is a great function when contesting. Thanks Greg
  • Bob G W1GLV
    Bob G W1GLV Member ✭✭
    edited June 2020
    once you have tuned Xor RIT, just press down on the tuning knob. That takes it out of X/RIT and back to tuning the freq. but leaves the X/RIT setting in tack.
  • Craig K9CT
    Craig K9CT Member ✭✭
    edited April 2016
    Guys...thanks for the info. I looked all over for an explanation before posting. Your answers are appreciated. I am a new owner of a Flex 6700 and new to FlexRadio gear. 73, Craig K9CT
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    Thanks, Bob, I missed that feature. I tried the knob push when RIT was off and assumed that it didn't do anything! Not it is even more helpful!

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories