Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

ACC + Mic input

Greg
Greg Member ✭✭
edited August 2016 in New Ideas
Please enable audio input from the ACCY line input while the MIC input is selected. This is a necessity to play recorded voice messages where the input is on the ACCY connector while the front panel mic is in use. 73 Greg AB7R
Tagged:

Comments

  • Robert -- N5IKD
    Robert -- N5IKD Member ✭✭
    edited March 2015
    Does selecting MIC from the drop down menu and selecting the +ACC button not work?
  • Greg
    Greg Member ✭✭
    edited November 2013
    No...I wish it did. :)
  • Greg
    Greg Member ✭✭
    edited November 2013
    Another aspect of this will be a way to set the gains for each of the inputs. For example, on the K3 when you use MIC+Line you have to set the input as line in and set the gain, then change to MIC input and activate mic+line. From there you can adjust the mic gain as necessary. 73 Greg

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.