Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Interfacing microHam Station Master to Tuner Genius

K7IU_Marv
K7IU_Marv Member ✭✭
in Peripherals & Station Integration
I'm trying to interface my microHam Station Master, which is connected to my FTdx101d, to my TGXL. Because I already have the Station Masters PA output port supplying BCD band data to my amp, I thought I could use pin5 (CI-V out) connected to the TGXL. I'd like to supply the TGXL with actual freq info as opposed to BCD so that it would fully utilize it's tuning solutions that are stored in memory. In theory this is supposed to work but the TGXL panel and utility so not recognize the CI-V data and remains in RF SENSE mode. I've tried this on both Ports A &B without success. Does anyone have any ideas?
Marv K7IU
Tagged:

Answers

  • K7IU_Marv
    K7IU_Marv Member ✭✭
    Turns out my idea worked. I was able to connect the CI-V data out from the Station Master to the CI-V in port on the TGXL. I also used the PTT line from the SM as well.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories