Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

CTCSS and Transverter

KlausP
KlausP Member ✭✭
in New Ideas

Since I would also like to use Flexradio via transverter for 2m and 70cm, I find it annoying that
CTCSS is only available on the TX side.

Even more annoying is the lack of CTCSS on the RX side.We have several repeaters here that operate in multimode.The lack of RX CTCSS also allows other modulations to pass through.

It does not prevent the CTCSS frequency from being stored in the channel memory.

Tagged:
5
Up Down
7 votes

Active · Last Updated

Comments

  • K9YK
    K9YK Member ✭✭

    100% Flex needs to add RX CTCSS and TX/RX DCS. We also need a user adjustable high pass filter in the AUDIO path that can be used to filter out lower audio frequencies so we don't have to listen to the CTCSS hum on receive.

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Yes, please!! For some unknown reason, they allowed a repeater to occupy a frequency out of the local band plan, right next to our club repeater frequency. With tone squelch, I would be able to monitor the club repeater without the other repeater blasting through.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories