What is wrong with my ZeroTier Set-up?

Kari Gustafsson SM0HRP

I have installed Zerotier with a plug-in in my 5G router (Teltonika). Then as follows:

1. Registered a ZT account.
2. Got a ZT Network ID and connected my router, PC and Mac OS to the network.
3. According to Router Manual I just then assign a managed route (192.168.1.0/24) to my Router via the ZT IP 10.27.x.x.x .
4. Then if I try to connect via web browser (10.27.x.x.x) to the router IP 10.27.x.x.x I should access all LAN devices (Flexradio, webrelay, PGXL etcetera). But I never get a "you are now connected to LAN 192.168.1.X or similar. Trying to ping my router does not get an answer.

Am I missing something? I add the pics from the manual.

ZT nr.1.jpg

Roland HB9VQQ

Kari, in my working setup on a Raspberry Pi as the Bridge (Layer 2) device, the ZT network and Internal network are on the same subnet, in my case 192.168.1.0/24

My internal DHCP Server assigns IP's from 192.168.1.2-199 while ZT assigns IP's from 200-229 to the ZT Client interfaces

Also, make sure your Bridge device is configured like this

Official ZT Bridge documentation https://zerotier.atlassian.net/wiki/spaces/SD/pages/193134593/Bridge+your+ZeroTier+and+local+network+with+a+RaspberryPi

Hope this helps.

Roland