Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

6400 transverter

Options
Alan C
Alan C Member ✭✭
edited January 2020 in FLEX-6000 Signature Series
Flex 6400. 2 meter transverter question. I looked for an answer in the hardware manual and the SmartSDR manual - couldn't find the frequency capability of the transverter port.  Of course, I need 28 to 32Mhz for the full 2 meter coverage. But frequency 30-32Mhz are out of the Ham bands. I was thinking that the software would prohibit any transmit in the 30-32Mhz range.

Will the 6400 transmit out the XVRT port  28- all the way thru 32Mhz?

I don't have the transverter yet - just trying to reduce my ignorance here.

Answers

  • SteveM
    SteveM Member
    edited January 2020
    Options
    I'm sure the 6400 would be the same as the 6500, which is 28-54MHz.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited January 2020
    Options
    The XVTR port will transmit on just about every frequency the radio can receive, with the exception of frequencies below 100 kHz.
  • Alan C
    Alan C Member ✭✭
    edited January 2020
    Options
    thanks, indeed, Tim...
  • SteveM
    SteveM Member
    edited January 2020
    Options

    For the record:


    imageimage

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories