Is a "round table" QSO possible using latest version of Multiflex?

Bill Owens

Duane_AC5AA

Kind of like being able to have a "monitor" function for the other operator's transmission.

Steve

Larry _ NY8T

I was playing with this today with my maestro connected through smartlink, If I used FDX and changed my receive antenna in ssdr on my pc and maestro to RX1 (pixel loop) I could hear my voice on the other client while transmitting. The only limitation I found was while on the same band I could not have 2 differant mic inputs or levels, changing one changed the other.... otherwise it works. 

Monitor works also but it is prone to feedback because again, while on the same band changing the level on one client changes it on both.

Bill Owens

Thank you, Duane, Steve and Larry. Of course, a monitor function. If it were a snake I would have been bitten! I did try the monitor function on the 6600 and the Maestro, with  partial success. The Maestro picked up my voice from the 6600 but the 6600 is not picking up the voice from the Maestro. I will go back and review, I must have missed something. Bill, AD5EW

Larry _ NY8T