Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

happiest day of my life

ricky
ricky Member
flex is like a boat two happy days the day u get it and the day you get rid of it today I sold my flex


now I have a radio that the power cord does not fall out of 

it comes on within second after I push the button

the outboard display does not cause the radio to start up sideways screen

and my mike and cw and phone plugs in on front 
«1

Comments

  • Neil D Friedman N3DF
    Neil D Friedman N3DF Member ✭✭✭✭
    edited June 2020
    So what fabulous radio do you have?
  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited March 2019
    I would not bother asking him, there is something wrong with his comments. One of them is not a problem, the other has been corrected a long time ago. Very behind in information.
  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator
    edited April 2019
    My power cable has not fallen out of my remote 6500 or local 6600. Guess I am not tripping over it. You can’t please everybody. My 6600 has performed beautifully during CQ WPX this weekend.
  • VK7WH Winston
    VK7WH Winston Member ✭✭✭
    edited March 2019
    I bought my 6700 in 2014. No only has the power cord not fallen out, it has never given me a problem other than those problems I have caused myself, and I will never sell it I’m currently in Hawaii, and spent a wonderful day operating an Icom legacy radio from the Battleship Missouri Amateur Radio Station KH6BB. A once in a lifetime opertunity for me, but oh how I missed my Flex. It was like I was operating with a blindfold. Just my 2cents worth. YMMV Winston VK7WH
  • Jeff Schwartz
    Jeff Schwartz Member ✭✭
    edited March 2019
    The day I had to sell my boat was a sad day. I had to move across the country and could not take it with me. I suspect selling my Flex would be even worse. No plans to do that but if I did my Flex 660M and 6400M will both be going with me.
  • Johan _ SE3X
    Johan _ SE3X Member ✭✭
    edited March 2019
    I think I will have the same feeling as Rick when soon departing with my back-up IC-7300 .. :)   Despite it having all the features Rick prefer over the Flex 6700 I'm in love with ..
  • N4VLK
    N4VLK Member ✭✭
    edited March 2019
  • Val  DM1TX
    Val DM1TX Member ✭✭
    edited March 2019
  • Burt Fisher
    Burt Fisher Member ✭✭
    edited June 2020
  • Johan _ SE3X
    Johan _ SE3X Member ✭✭
    edited March 2019
    Can't see yours? Just sayin :)
  • Burt Fisher
    Burt Fisher Member ✭✭
    edited March 2019
  • K1UO Larry
    K1UO Larry Member ✭✭✭
    edited March 2019
    Burt's call is K1OIK  and, in my opinion, is a kind and thoughtful man... just saying.
  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator
    edited March 2019
    I can’t remember the last time I shut my 6600 off. Oh yeah, when I built my new desk. My 6500 at the remote site has been on over a year now. You never know when you have the itch to work remote. Dave wo2x
  • N4VLK
    N4VLK Member ✭✭
    edited March 2019
    My call was dropped from my profile at some point (I have added it back), but I did sign with my full name and photo.  It would be easy to look me up on QRZ.  Same with Burt.  His call is not listed, but easy to find.  My point was meant to be a general one, I don't give as much credibility to any post anywhere when the poster chooses to remain anonymous.
  • Bill N3HQB
    Bill N3HQB Member ✭✭
    edited March 2019
    The 6300 has mic and CW plugs in front; the display is always landscape; the power plug stays in, you can leave it turned on; you could have had it all.
  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited December 2019
    I don't beleive his post...
  • W3EX -- Tom
    W3EX -- Tom Member
    edited March 2019
  • mikeatthebeach .
    mikeatthebeach . Member ✭✭
    edited March 2019
    Whatever floats your boat 73 Mike
  • Doug
    Doug Member ✭✭
    edited March 2019
    Does the word "TROLL" pop up Bill. It sure did to me even before reading all the replies. Not worth my time.

  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited March 2019
    That's what I was trying to say Doug without really saying it,,lol
  • Burt Fisher
    Burt Fisher Member ✭✭
    edited March 2019
    Electricity is free for you?
  • Burt Fisher
    Burt Fisher Member ✭✭
    edited March 2019
    Doug hams have a habit of calling those who they disagree with a troll. Other than the plug falling out he has a point.
  • Russ K5OA
    Russ K5OA Member ✭✭
    edited March 2019
  • Rick  WN2C
    Rick WN2C Member ✭✭
    edited March 2019
  • KY6LA_Howard
    KY6LA_Howard Member ✭✭✭
    edited March 2019
  • Mike VE3CKO
    Mike VE3CKO Member ✭✭✭
    edited April 2019
  • N8FNR
    N8FNR Member ✭✭
    edited April 2019
    If I am not going to use my 6400 I shut down my rig and the PS. See no reason to use electricity for no reason, 
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
  • Burt Fisher
    Burt Fisher Member ✭✭
    edited March 2019
    There was a ham in California who said the happiest day of his life was receiving a QSL card from Bhutan. And he that included his marriage, children, when I pointed that out in a forum I was banned for a week.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.