spot display with ssdr 2.3.7

K1DBO

...sorry, should have mentioned that there is an email address on the Slice Master splash screen or my address at QRZ works too.

W9BS

Thank you.  File is on the way.

Dave AA6YQ

As Dave NX6D reports above, displaying active callsigns on SmartSDR with Commander 13.6.5 does require that you click the Bandspread button on Commander's Main window, which displays Commander's Bandspread window; after doing so, you can minimize or close Commander's Bandspread window. This defect will be corrected in the next version of Commander.

I have updated Displaying Active Callsigns on SmartSDR's Panadaptor accordingly.

Mark_W3II

FRStack does not have a feature to display telnet SPOTS. FRStack provides a menuing system via SPOT. Use DXLabs, N1MM, SliceMaster etc to get Telnet SPOTS.

Andrew Chesnokov

Configured SSDR and Commander per Dave's instructions. All spots in SSDR panadaptor shown at extreme bottom of the band though, i.e. 14.000, 7.000 ,3500 etc.

Dave AA6YQ

Pick a callsign that is being displayed at the bottom of the band. Now examine SpotCollector's the Spot Database Entry for that callsign. What frequency does this entry specify?

Steven WA8Y

Well you have to go to the config button on the band spread and you have to click the button for the display

Jay Spaulding

Does it work with Log4om? Or can you have it grab spots from the internet with out even having a log that does cluster?

Andrew Chesnokov

DB shows freq like 1.41930000000000 or 7.1150000000000 etc

Dave AA6YQ

SpotCollector displays frequencies in kilohertz, some something is badly wrong.

Andrew Chesnokov

Frequencies in Spotcollector are ok 14.193,0 or 7.115,0
But in Spotcollector DB weird

Dave AA6YQ

Please make a screen shot showing whatever it is that is "weird", attach the screen shot to an email message, and send it to me via aa6yq (at) ambersoft.com