Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Combining my Stations using SmartLink

Member ✭✭✭
edited August 2017 in SmartSDR for Windows

Well not fully combining, but being able to do A/B comparison via SmartLink between my two stations.

I did lengthy write up at http://k9zw.wordpress.com with a maps and stuff.  https://k9zw.wordpress.com/2017/08/03/remoting-via-smartsdr-and-smartlink-v2-0-both-my-stations-are-...

In a nutshell I was able to sit at a friend's shack, using his Flex-6300 while remoting alternating between my North and South QTH's shacks working other stations, including DX.

Someday I hope to be able to recombine the stations into a "virtual shack" but this is a HUGE move in the right direction.

Kudos to FRS!

73

Steve K9ZW

Comments

  • Member ✭✭
    edited August 2017

    I have two remotes. I use a computer on one and an iPad on the other. Also can "simo" on the same computer using a remote desk top and SmartSDR on the same computer. Fun to A/B to the two remotes.


Leave a Comment